MAXIMUM Security Multi Zone, Руководство пользователя

Страница: 27 / 40

-
27 –
in order to modify its setting.
c.
SAVE , under any name, the modified parameters in the Remote Control memory.
6. Press SAVED PROGRAM to load the list of saved programs (the programs you saved
in the previous paragraph).
Press any program title to display its list of parameters, after which you have 3 options:
a. SEND the original parameters to the detector.
b. Modify the parameters on the Remote Control and SEND them to the detector in
order to modify its setting.
c. SAVE the modified parameters under the same program name or under a different
program name in the Remote Control memory.
7. Press Prog. Detector if you wish to display a list of all programmable detector features.
Press any program title to display its list of parameters, after which you have 3 options:
a. SEND the original parameters to the detector.
b. Modify the parameters on the Remote Control and SEND them to the detector in
order to modify its setting.
c. SAVE the modified parameters under the same program name or under a different
program name in the Remote Control memory.
8. Pressing Restrictions enables two options:
a. Restrict the detector to read only mode
– It means the detector’s values
(parameters) can be read off by the Remote Control without possibility to program
the detector by means of the Remote Control.
b. Delete a code assigned (programmed) to detector.
In case you wish to re-program a code to the detector, you have to program
(assign) again a code to the detector as described on page 26.