-
10
–
Terminal Block Wiring
Terminal Block Wiring Specifications
Terminal No.
Mark on the PCB board
For
1+2
+ -
12 V DC input Power Supply
3+4
COM, IN, OUT
Data communication between the detector and
the control panel.
5+6
MASK
Anti-masking relay.
7+8
RELAY 2
Secondary alarm relay that activates also in
case of shock or vibration detection.
9+10
RELAY 1
Main alarm relay switching on upon movement
detection.
11+12
TAMP
Tamper switch (located in rear and front case).
Upon connecting Multi-Zone to the power supply
Upon connecting Multi-Zone to the power supply, a 60 second countdown begins. When
the countdown ends, 3 short tones will be heard indicating that the detector is now ready
for work.
During the countdown, red, green and yellow LED indicators will blink one after another
on the top of the detector. The display will provide information about the vertical location
of the PIR sensors array (see information on page 7, 8, 12).
In case the power supply is low, red and green LEDs will blink shortly each second.
IN OUT
COM
12 V DC
MASK
RELAY
2
RELAY
1
TAMP
1
2
3
4
5
6
7
8
9
10
11
12
