-
12
–
Important
If during the study procedure the detector's case is not properly closed (the tamper switch
is not pressed), the anti-masking channel will not work and the study procedure will not
be performed.
Programming
In this detector, unlike other detectors, all adjustments are done by programming which is
more advanced, comfortable and accurate, by means of 4 keys and a display.
In the beginning, the detector's display shows the vertical location of the 3 upper PIR
sensors and the lower 3 PIR sensors.
To enter programming mode, press
OK
key.
The display will show
PM
(
P
rogra
m
ming).
By means of keys
▼ ▲,
select the detector's feature you wish to change/program. The
programming table is represented on page 14-21.
To enter the menu of a requested feature, press
OK
.
To change feature values, use the keys
▼ ▲
, and confirm by pressing
OK
.
To exit without change at any stage use the key
EXIT
.
To activate/deactivate a feature which is not offered in the menu, press
OK
only each
time.
Two decimal points will glow to confirm activation of the feature, and will be activated off
to confirm deactivation (for example, W
.
T
.
feature is activated, WT feature is
deactivated).
EXIT
OK
