Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 52 of 195
Page 52 of 195
by setting the timezone offset configured in device with respect to UTC time.Timezone format is
+/-
:hr:min
.
+/- is the offset polarity
hr=hours, -12 to +12
min = minutes, 0 to 59
Default timezone set from factory is +05:30.
Refer below image for timezone setting:
In above figure, user can enter the
Timezone setting option in Calender setting mode by using “LEFT” or
“RIGHT” key. The value displayed in Timezone option is the current configured timezone offset. To modify
this value, press “OK” key and then UP/DOWN key to edit the value at cursor and LEFT/RIGHT key to
shift the cursor. After value is set, press “OK” key to save the settings.
As soon as value is saved, the change in offset will be reflected on all outputs configured to show local
time.
User should check the settings of DST since if DST is ON, it can affect the Local time display which again
depends on DST time parameters set.
Note:
All the calendar settings will only become effective once user come out of configuration
mode of keypad menu to normal run mode.
2. DST (DAYLIGHT SETTINGS)
MTS200 can be configured for Daylight settings and selectable option to set DST ON or OFF though
keypad. Daylight offset works with respect to UTC. So, user needs to enter the daylight offset w.r.t. UTC
time as timezone offset is neglected during daylight start and end time.
User can start or stop daylight saving feature by option DST ON / OFF setting. For saving daylight
parameters, user need to enter all below parameters for correct local time effect for DST. Following are
parameters need to set correctly for correct local time for DST.
“
DST Offset
” =
format (+/-:hr:min)
. This is DST offset w.r.t. UTC time.
+/-:hr:min = +/- DST offset polarity w.r.t UTC, hr is hour 0 to 12 and min is minutes 0 to 59.
“
DST Start
” =
Format (m.w.d)
. This is DST start day on which the DST offset will come into effect.
m.w.d = month.week of month.day of week of month.
This specifies day
d
(0 <=
d
<= 6) of week
w
(1 <=
w
<= 5) of month
m
(1 <=
m
<= 12). Week 1 is the first week in which day
d
occurs and week 5 is the last
week in which day
d
occurs. Day 0 is a Sunday.
