Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 178 of 195
Page 178 of 195
System Configurations:
Process list shows the current process running in MTS200 device. The process list is only refreshed on
the loading of webpage. User need to refresh this webpage to see current list of process running in
system.
Device Version give details about the MTS200 version information.
Reboot Device option can be used to reboot the device through webserver. While this option will cause
reboot, all outputs of MTS200 will be halted till the units get started again. All log messages will be
cleared and all Ethernet services will be restarted again.
Device Update:
User can have below page from “Administration” page by clicking on “Device Update” button at on
“Administration” page.
Here user can update number of files at a time. User has to select respected files to upload.
Three options are available in the Device update.
1) Firmware Update
2) Configuration Files.
3) Others.
To update firmware or configuration files click on the choose file button, it will prompt user to select the
respected file. Select that file and click on submit button.It will take some time and device will reboot.
Note:
In case of firmware update, files should be kept in compressed format with named
mts200_boot.tar. Make sure that final updated files are present in the mts200_boot.rar.
For configuration file update, select the respected configuration text file.
*
: MTS will be reboot after clicking submit button
