Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 10 of 195
Page 10 of 195
2 Introduction
masibus
MTS200
mas
TER
T-Sync
has been developed for the time synchronization requirements
in various industries like power, process, IT, telecommunications. Masibus next-generation GPS clock
provides enhanced performance and security. It is the most featured and cost-effective GPS time
synchronization solution available in 1U compact size. MTS200 is Reliable and provides time accuracy of
150nsec at basic level.
To begin with,
mas
TER
T-Sync
model MTS200 offers precise timing accuracy using GPS satellites; it
generates accurate output pulses and time codes in multiple formats. It‟s necessary every time to Lock
GPS once after power ON in order to ensure the better accuracy.
mas
TER
T-Sync
Model MTS200 synchronizes a wide variety of microprocessor-based power system
equipment including: SCADA systems, remote terminal units (RTUs), protection relays, sequence of
event recorders, digital fault recorders, tariff meters, Slave Display Units, Data Loggers and other
Intelligent Electronic Devices (IEDs). Being a Field programmable device using HyperTerminal / Putty, a
very common application in Windows or 8 key Keypad provided on the front panel,
mas
TER
T-Sync
Model
MTS200 allows the user to alter the settings or choose from Time codes. Each output can feed directly to
different areas through electrically isolated ports which ensure reliable operation in a harsh substation
environment.
mas
TER
T-Sync
Model MTS200 generates a wide range of timing signals via seven output ports.
Standard configurations of
mas
TER
T-Sync
Model MTS200 is equipped with two serial ports, a 1PPS
Port, 1 IRIG-B TTL / IEEE 1344 (field configurable)and three PFC relay outputs for POWER,
WATCHDOG, GPS LOST alarm and standard PMOS relay based pulse output of PPM/PPH or RTC ON
event.
mas
TER
T-Sync
Model MTS200 is available with optional feature outputs such as additional 1Gbps eth1
port, 4 additional PMOS relay based pulse outputs each configurable from a second to a day period time,
two IRIG-B127 / IEEE 1344/C37.118-2005 Amplitude modulated output (field configurable) or 1 IRIG TTL
+ 1 IRIG-AM (field configurable) output. Com1 Serial port provides NMEA-GPRMC format. Com2 serial
port is configurable for either NGTS or T-format or GPZDA or GPGGA.
MTS200 is a full featured NTP Server (NTPv2/v3/v4) with all available NTP authentication methods
available. MTS200 provides time synchronization to different network Clients which are supporting NTP
protocols. In addition NTP unicast, MTS200 can be configured with broadcast or multicast mode.
mas
TER
T-Sync
Model MTS200 units feature a front panel display, giving both installation teams and
users visual feedback about the time data being generated on the outputs. LED indicators provide “at a
glance” status information. It also hosts various protocols such as Telnet, SSH, HTTP, HTTPS, SNMP for
its own monitoring and configuration management. MTS200 is capable to log alarms internally as well as
on remote server through syslog protocol and generate various alarms over syslog and SNMP traps.
The optimized Receiver/Antenna system employed in
mas
TER
T-Sync
Model MTS200 provides time
information from the GPS satellite constellation. Dynamic T-RAIM processing is used to eliminate any
aberrant satellite signals from the timing solution. The result is timing precision on all outputs with
accuracy similar to that normally seen only in laboratory instruments.
mas
TER
T-Sync
Model MTS200 unit is Rack Mount and its mechanical dimensions are 482.6(W) x 44(H)
x 241(D) mm (IP 20 Enclosure).It is supplied complete with all hardware and software required for the
installation, including the Antenna, Antenna mounting kit, 10 meters Antenna cable, 3 meters RS-232
cable and 10 meters RG58 Co-axial cable. (Depends upon commercial terms & condition)
