Marvelmind Mini-RX, Руководство по эксплуатации

Страница: 114 / 251

114
5.2.21.4. Now, enter measured (measure it with laser distance meter or so)
value. That values would not change until you unfreeze or clear it. Even
if beacons had been moved, distance would stay. Be careful with frozen
cells because a small mistake can cause a huge impact on your
tracking.
5.2.21.5. Repeat for all cells.
Freeze submap and by clicking the button. Stationary beacons will stop measuring
relative distances and will be ready to measure distance from the mobile
beacon(s).
Turn on and wake up the mobile beacon following the same steps as with the
stationary beacon: https://youtu.be/A4aRsjH2-_E
If you see on the devices’ panel in the Dashboard that the beacon is colored
orange, it means there are some differences in some of the settings between
beacons. For example, some sensors may be off or some ultrasonic or radio
settings may be different. You can change the settings for sensors manually by
clicking on the panel on the upper right corner of the Dashboard to change the
cells from gray to green to turn on sensor. It is recommended that the default
settings on all beacons and the modem be used if this is your first time using the
system.
After you freeze the map of stationary beacons, wake up the mobile beacon. After
it wakes up, it will be traceable in 5-7 seconds.
freeze submap