Märklin Central Station 3, Руководство пользователя

Страница: 58 / 235

18
Adding S88 Contacts
S88 contacts expand the possible ways to control enormously.
Tap on the tool symbol for the item list („Edit“) and in the drop-
down menu tap on „Add Article“ (left image) in order to add
them to the item list. Select „S88 Contacts“ in the menu that
follows.
You set the device to which the feedback contact is connect-
ed in the drop-down menu „Device“.
On the CS3 plus you will find here the option „GFP3-1“ that
corresponds to the S88 connection on the underside of the
device (left image).
On the CS3 (60226) feedback modules are connected by
means of the Link S88 (see below).
A tap of your finger on
„Ok“ adds the contact.
Selecting the device to which the
contact is connected (see below).
Contact number on
the S88 module.
Number of the S88
module being used.
Selecting the type of feedback
contact (see below).
Selecting the
Märklin bus
being used.
Adding Other Items
All kinds of items can be added by means of this op-
tion: Tap on the tool symbol for the item list and select
„Add Article“ in the drop-down menu (left image) as
well as in the extension „Misc Devices“.
In the „Type“ field set the definite type of item (left image) and
adjust the other fields – in the tabs „Info“ and „Set Up“ –
to your requirements.
Now you are in the settings menu. Here you set the details for the new S88 contact:
Extension path for the feedback contact:
When you are using the Link S88, feedback contacts
can be connected in the following ways:
- Directly at the Link S88
- To other S88 modules that are connected to the Link
S88 (by means of Bus 1, Bus 2, or Bus 3)
- By means of a button matrix (see Page 19)
You select the type of connection (Bus) per contact
and enter the number for the S88 module (1-32) and
the number for the switching contact on the module.
With the type of connection „Direct“, it is enough to
enter the number for the switching contact at the Link
S88.
Bus and Module Entry When Using the Link S88: