Maretron DSM570, Руководство пользователя

Страница: 62 / 283

DSM570
User’s Manual
Page 46 Revision 1.8.3
•
Engine Trip Fuel Used
– may be reset to zero for fuel flow transducers that are capable of
being reset via the 126208 NMEA 2000
®
command message, such as the Maretron FFM100
•
Trip Volume
– may be reset to zero for fluid flow transducers that are capable of being reset
via the 126208 NMEA 2000
®
command message, such as the Maretron FFM100
•
Trip Log
– may be reset to zero for log transducers that are capable of being reset via the
NMEA 2000
®
command message, such as the Maretron DST110, may be reset with the
control mode of the display
– see Section 5.2.7.14 for details
For
resetting “Engine Total Fuel Used”, “Trip Volume”, or “Trip Log”, use the following procedure to
reset the total in the transducer providing the value.
In normal operating mode, use the “Scroll Up” and “Scroll Down” keys to change to the screen
containing the display to be reset. Once that screen is displayed, follow these steps to reset the
appropriate display:
1.
Press the “Enter” key for approximately one second. This will place the display into “Control
mode”, and one of the controllable items on the screen will be highlighted with a thick border.
2. If there is more than one controllable item
on the screen, you may use the “Scroll Up” and
“Scroll Down” keys to change the highlight to the display to be reset.
3. Once the display to be reset is selected, then
press the “Power” key. You will then see a
confirmation popup asking whether it is okay to set the Anchor Drop position to the current
position. If you answer “Yes”, then the Anchor Drop position will be set to the current GPS
position.
4. To exit the control mode,
press the “Lights” key to return to normal operating mode. The
highlight will disappear.