Maretron DSM570, Руководство пользователя

Страница: 227 / 283

Revision 1.8.3 Page 211
7.8 Half Gauge Display
The Half Gauge display shows the selected parameter value in a graphical format resembling a
semicircular analog gauge. A full screen example of a half gauge display can be seen in below.
Figure 245
– Half Gauge Display Example
7.9 Indicator Light
The DSM570 is capable of displaying the state of binary (ON/OFF) sensors on the network with an
indicator light display that emulates a status light on a control panel.
The display may be set up in several different configurations:
•
Single-Indicator Light
– this creates a single indicator light
•
2 rows
– this creates four rows of single indicator lights
•
3 rows
– this creates three rows of single indicator lights
•
4 rows
– this creates four rows of single indicator lights
•
2 rows, 2 columns
– this creates two rows by two columns of a single indicator light
Figure 266
below shows a Favorite Screens Setup screen with a single window configured with the “4
rows” configuration.