Maretron DSM570, Руководство пользователя

Страница: 207 / 283

Revision 1.8.3 Page 191
6.28.1.2 Installation Description
This entry allows you to modify the NMEA 2000 installation description text strings. You can enter
any information you like here, such as the date the unit was installed, or the location in which it was
installed, for later reference. Tools such as Maretron N2KAnalyzer allow you to view these values
later.
6.28.1.3 NMEA2000 PGN Enable/Disable
The TMP100 Temperature Module transmits a number of the NMEA2000
®
PGNs which can be
turned on or turned off by the DSM570 display. For reasons of compatibility with older NMEA2000
devices, some of these PGNs are redundant; disabling these PGNs will reduce the amount of traffic
on the NMEA2000
®
bus. Pressing the Enter
key with “NMEA2000 PGN Enable/Disable…” menu item
selected causes the DSM570 to display the following screen (Figure 217).
Figure 217
– TMP100 NMEA 2000
®
PGN Enable/Disable Screen
You can enable or disable the transmission of a PGN message or set the frequency of transmission of
the message by pressing the Enter key (
) on the message to be configured. Options are:
Off
– The PGN will not be transmitted
On
– The PGN will be transmitted at its default NMEA2000 rate.
0.5s…5s – The PGN will be transmitted at the interval specified.
Select the required option using the
Scroll Up and Scroll Down keys followed by the Enter key.
6.28.1.4 Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.28.2 Channel Configuration
Individual channels may be configured by using the Scroll Up and Scroll Down buttons to highlight
the channel, and then pressing the Enter key. The following screen will be displayed.