Maretron DSM570, Руководство пользователя

Страница: 107 / 283

Revision 1.8.3 Page 91
With the offset value highlighted, you can change the offset by using the Increase and Decrease
keys
( or )
. Once you have selected the desired offset, push the Enter key ( ) to complete
the transducer depth offset calibration. This procedure actually programs the offset value into the
DST110 such that all displays subsequently receive the offset informa
tion. This means you don’t have
to program multiple displays each with the corresponding offset information as the information is
stored at a single place (at the source).
6.10.7 Trip Log
The DSM570 is capable of clearing the trip log counter within a DST110 depth/speed/temperature
transducer. You zero the trip log by pressing the Enter key (
) with the “Trip Log:” menu item
selected which results in the screen shown in Figure 75. Pressing the Accept ( ) key while the
“Reset” menu item is selected will complete the operation. Resetting the trip log zeroes the DST110’s
trip log such that all displays receive a zeroed value (i.e., you don’t have to perform the operation
from other display locations).
Figure 82
– Resetting the DST110 Trip Distance Log