Maretron DSM570, Руководство пользователя

Страница: 164 / 283

DSM570
User’s Manual
Page 148 Revision 1.8.3
Figure 151
– RAA100: Setting the Rudder Number
6.19.5 Operating Mode
The RAA100 can be operated in one of two operating modes, depending on the installation.
•
NMEA 2000 (the only thing that is connected to the resistive sender is the RAA100)
•
NMEA 2000 & Analog Gauge (in addition to the RAA100, the resistive sender is also
connected to a dual-coil analog gauge).
It is important that this setting be performed correctly in order for the RAA100 to produce correct
angle measurements. A screenshot showing configuration of the operating mode appears in Figure
152 below. To configure the operating mode, use the Scroll Up (
) or Scroll Down ( ) keys to
move the highlighted cursor over the “Operating Mode:” menu item, then press the Enter key (
) to
move the highlight over the operating mode value. Use the Scroll Up ( ) or Scroll Down ( ) keys
to change the operating mode to the desired value, and finally, press the Entry key to confirm your
selection and store the operating mode within the RAA100.
Figure 152
– RAA100: Setting the Operating Mode