Maretron DSM570, Руководство пользователя

Страница: 56 / 283

DSM570
User’s Manual
Page 40 Revision 1.8.3
•
Bar Graph (see Section 7.2 on page 206)
•
Compass Rose (see Section 7.3 on page 206)
•
Date (see Section 7.4 on page 208)
•
Date/Time (see Section 7.5 on page 208)
•
Gauge (see Section 7.4 on page 208)
•
GPS Status (see Section 7.7 on page 210)
•
Half Gauge (see Section 7.8 on page 211)
•
Indicator Light (see Section 7.9 on page 211)
•
Numeric (see Section 7.8 on page 211)
•
Numeric/Precision (see Section 7.11 on page 215)
•
Rolling Road (see Section 7.11 on page 215)
•
Line Graph (see 7.13 on page 217)
•
SMS Status (see Section 7.14 on page 217)
•
Time (hh:mm) (see Section 7.15 on page 217)
•
Time (hh:mm:ss) (see Section 7.16 on page 218)
•
VDR Status (see Section 7.17 on page 218)
•
Weather Screen (see Section 7.14 on page 217)
•
Wind Rose (see Section 7.19 on page 221)
•
Moon Phase (see Section 7.20 on page 221)
•
SMS Signal Strength Bar (see Section 7.21 on page 221)
•
Trim Tabs Bar Graphs (see Section 7.21 on page 221)
•
Swing Meter (see Section 7.23 on page 222)
•
Tank Gauge (see Section 7.24 on page 223)
•
Watermaker Status (see Section 7.25 on page 223)
•
Switch/Breaker Display (see Section 7.25 on page 224)
5.2.6.4.2 Instance
Instance is used to specify which product on the network will be used as the source of the displayed
information. For example, there may be two GPS’s on the network each of which will have a unique
instance assuming the network has been properly configured. You use the instance field to tell the
DSM570 which GPS to use for displaying data. Most of the time, the DSM570 simply displays a
single parameter from a device on the network so you will on
ly see one “Instance” entry. There are
other parameters that the DSM570 displays that are a combination of information from multiple
products on the network. For example, fuel economy is a combination of fuel rate and Speed Over
Ground (SOG) so you will see two “Instance” entries, one to specify the engine(s) and one to specify
the GPS for SOG.
5.2.6.4.3 Alert
In setting up the Anchor Watch display type, this field is used to specify the associated Anchor Watch
Alert priority. The list from which the selection is made will be limited to the list of Anchor Watch Alerts
already created in the system.