1133.12B1/B3/F1/F3
GA113312EN02
24
3.3 Collision protection at the leg plate mounting
point
The table top is fitted with an accessory recognition
feature at the leg plate mounting point. When using
encoded leg plate accessories, this feature recognizes
the accessories and avoids collision with the operating
table or the floor during leg plate adjustment.
Encoded accessories are fitted with a “code plug” (A) at
the front of the mounting pin.
Accessories which are not encoded at the mounting pin
can be used at the leg plate mounting point; however,
there is no collision protection when making adjustments.
Injury hazard!
It is possible to use accessories which are not
encoded at the leg plate mounting point: this may,
however, result in collisions during certain adjust-
ment procedures.
Observe the movement during the adjustment
procedure and be sure to avoid any collision.
Injury hazard!
Additional accessories mounted at the side rails
will not be recognized by the collision protection
feature.
Observe the movement during the adjustment
procedure and be sure to avoid any collision.
Injury hazard!
A leg plate which is mounted in addition at the
seat plate extension will not be recognized by
the collision protection feature.
Observe the movement during the adjustment
procedure and be sure to avoid any collision.
Functional sequence
⌧
Press and hold any button.
The collision protection is activated and will stop
the downward movement in time.
⌧
Release the button.
III. General description
Fig.III-26: Accessory recognition feature
A