manualshive.com logo in svg

Maquet 1133.12B1, Руководство по эксплуатации, Страница: 26 / 56

Поделиться
Скачать
Maquet 1133.12B1 Скачать руководство пользователя страница 26

1133.12B1/B3/F1/F3

GA113312EN02

26

A

III. General description

3.3.2 Leg plates

Split leg plate 1133.53BC

•

To mount the split leg plates, press the push-button
(10) and insert the leg plate pins in the mounting
sockets, up to the stop (Abb. III-30).

•

The leg plate is locked as soon as the push-button
is released (10) (Fig.III-31).

•

The slope of the leg plate is adjusted
electrohydraulically by means of the control mod-
ule.

•

To abduct the leg plate, open the eccentric lever (9)
and set the desired abduction angle.

•

Retighten the eccentric lever after making the ad-
justment.

•

A dual-pivot joint is used to abduct the leg plates
1133.53 so that on the one hand the surgeon has
access to the patient’s body from the foot end while
at the same time  the patient’s leg is given suffi-
cient support.

•

To remove the leg plate, press the push-button (10)
and pull the leg plate out of the mounting sockets.

Before setting the leg plates in the flat and hori-

zontal position (0-position), be sure to observe
that they are not positioned one on top of the
other.

Collision hazard! Injury hazard!

Single-section leg plate 1133.58BC

•

To mount or remove the single-section leg plate,
acuate the release lever (A) and insert the leg plate
in the mounting sockets up to the stop or remove it.
The single-section leg plate is suitable for surgical
procedures in orthopaedics ans vascular surgery
where the patient’s legs are to be X-rayed. The slope
of the leg plate is adjusted electrohydraulically by
means of the control mudule.

Fig.III-31: Unlock the leg plates

Fig.III-30: Mount the split leg plate

10

9

10

Fig.III-32: Mount / remove the single-section leg plate

Содержание 1133.12B1

























































Отзывы:

Нет отзывов