1133.12B1/B3/F1/F3
GA113312EN02
28
4.
Autodrive in the base
The operating table version 1133.12B3/F3 is equipped
with an autodrive in the base. The operating table will
start moving slowly and will slow down softly after re-
leasing the function button (i or k).
i)
BACKW.
Move the table backward in the longitudinal
direction
k)
FORW.
Move the table forward in the longitudinal
direction
To move the operating table, proceed as follows:
•
Remove the mains cable from the operating table
•
Fully extend the operating table castors (press UN-
LOCK button)
•
Guide the operating table with at least one hand
•
Press function button (v or w) and the operating ta-
ble will move in the selected direction.
•
Release function button (v or w) and the operating
table will gently brake until it stops.
Note:
If the LEDs for the LOCK and UNLOCK functions
are flashing, press the UNLOCK button.
Guide the operating table with at least one hand
during displacement.
Note:
When moving the operating table, do not press the
override system buttons since this will cause sev-
eral functions to be activated simultaneously and
involve the hazard of injury or collision with potential
hindrances.
Note:
The operating table can only be moved laterally if
you have not activated the BACKW. or
FORW.functions!
III. General description
Fig.III-33
: Overide control panel