
1133.12B1/B3/F1/F3
GA113312EN02
17
III. General description
3.
Table top
3.1 General features
The table top 1133.12 has been designed to meet the
requirements of various surgical disciplines. Selecting
from a variety of modules lets you adapt the geometry
of the table top to accommodate the individual patient
height.
The table top is divided into a maximum of 6 sections,
depending on the type of leg plate and upper back plate
module selected.
•
Head plate
•
Upper back plate (extension segment)
•
Lower back plate
•
Seat plate
•
Leg plates
The table top is equipped with a motor-powered
longitudinal shift feature through 230 mm, and motor-
powered adjustment functions for the back plate and leg
plates. Furthermore the mounting sockets for the leg
plates automatically detect whether one-piece
components have been installed, thus increasing
reliability and safety in use. Depending on the application,
the adjustment ranges for the accessories mounted at
the leg plate mounting point may be restricted. Please
refer to the operating instructions for the accessory in
question.
Attaching different back plate modules at the lower/
upper back plate mounting point enables positions
perfectly suited to the patient and more favourable
functional working conditions for the surgical team and
the procedure. Guide rails for X-ray cassettes are
located underneath the back plate. The side rails are
used to attach accessories. Various head positioning
accessories can be mounted at the head end of the back
plate modules instead of the head plate (see chapter V,
Patient positioning).
Note:
According to the IEC 60601-1 international stand-
ard, the operating table is designed for safe han-
dling of a patient weight of 450 kg (1000 lb). When
using accessories, the maximum load may be re-
stricted. Please observe chapter VIII List of acces-
sories.