
1133.12B1/B3/F1/F3
GA113312EN02
12
The functions of the override control panel are shown in
the following:
A) LED-Status indicators of the operating table
Note:
The status indicators are only active when the
corded hand control or the IR remote control is
switched on.
Description of the symbols from left to right:
•
Mains connection: the green LED lights up
when the operating table is connected to the
mains.
•
Battery charge level: the red LED flashes when
the operating table batteries have to be re-
charged as soon as possible.
•
Operating table is immobilized: the green LED
lights up when the operating table is immobi-
lized, i.e.
LOCK activated.
•
Operating table castors are extended:
the red LED lights up when the operating ta-
ble is on its castors and can be displaced, i.e.
UNLOCK activated.
B)
ON
switches the motor on and must be
pressed in addition to each function but-
ton
C)
TREND
Table top into Trendelenburg position
D)
REV.
Table top into reverse Trendelenburg
position
E)
UP
Table top up
F)
DOWN
Table top down
G)
TILT
Lateral tilt to the left
H)
TILT
Lateral tilt to the right
I)
UP
Slope back plate upward
K)
DOWN
Slope back plate downward
L)
UP
Slope leg plate upward
A
C E G I L N
B D F H K M O
III. General description
Fig.III-5: Override control panel buttons