manualshive.com logo in svg

Maquet 1133.12B1, Руководство по эксплуатации, Страница: 18 / 56

Поделиться
Скачать
Maquet 1133.12B1 Скачать руководство пользователя страница 18

1133.12B1/B3/F1/F3

GA113312EN02

18

Fig.III-14: Mount the head plate adapter

A

III. General description

B

B

3.2  Mechanical adjustments

3.2.1 Mount / remove the head plate

Note

Use and handling are described in detail in the op-
erating instructions for this product.

Note

The head plate adapter 1130.81A0 is required to
mount head plates at the back plate mounting point.

3.2.1.1 Mount the head plate using the head plate

adapter 1130.81A0.

Note

The head plate adapter consists of a left and a right
part. Please observe the markings L and R.

If the adapters are mixed up, the distance of the
mounting sockets is not correct.

Mount the head plate

⌧

Insert the pins of the two head plate adpaters
1130.81A0 (A) in the sockets (B) at the back plate
mounting point, up to the stop.

⌧

Insert the head plate pins (C) into the mounting
sockets (D) at the front of the table top, up to the
stop.

A

Fig.III-15: Mount the head plate

C

D

D

Содержание 1133.12B1

























































Отзывы:

Нет отзывов