Mantis Vision F5-B, Руководство пользователя

Страница: 65 / 126

F5 3D Imaging System User Manual
65
3
Click Apply. Applying the filter reduces the number of points. You can see the
reference of the original value, as well as the amount left after filtering.
NOTE
Accuracy Thresholds refers to the actual distance between the location of
each 3D point and the calculated P polar pattern which is produced by the
imager camera
You can continue with Segment Registration using either the Manual Alignment
mode or the Three-point Alignment mode. For more details about Manual mode,
you may refer to the Manual Alignment section on page 65. For more details
about Three-point Alignment mode, you may refer to the Three-point Alignment
section on page 67.
NOTE
Once a file is saved, the point filters are saved with it and cannot be
changed or removed.
Manual Alignment
Sometimes it is necessary to manually manipulate (position) two segments into
alignment for registration.
►
To perform manual alignment:
1
Manipulate the selected segment (Blue) using the Ctrl button and the mouse
to roughly align it with the reference frame. The Shift button moves the
selected segment (Yellow) and the Ctrl button moves the reference segment
(Blue).
When Ctrl is pressed, transformation is performed only on the selected
segment. Mouse-manipulation controls operate as follows:

Rotate the segment by holding down the left mouse button while
moving it over the scene.

Move/pan segments in the scene by holding down both mouse
buttons and moving the mouse.

Zoom in/out by clicking the right mouse button while moving the
mouse or with the mouse wheel.