Man D2862 LE221, Руководство по ремонту

Страница: 109 / 420

COMMON RAIL SYSTEM
HIGH-PRESSURE LINES AND RAILS
Removing, installing the high-pressure lines and rails
Additional jobs
–
Removing, installing the combination air lter, see 187
– Removing, installing engine control units, see 27
– Removing, installing the combination air lter holder, see 193
– Removing, installing the engine wiring harness, see 25
– Removing, installing the charge air manifold, see 181
– Removing, installing the cooling system, see 55
– Removing, installing the ramfan, see 61
– Removing, installing the fan V-belt, see 85
– Removing, installing the intermediate ange, see 63
– Removing, installing the fan tensioning pulley, see 89
– Removing, installing the fan carrier with fan bearing, see 91
– Removing, installing the coolant pump coolant manifold, see 73
– Removing, installing fuel lines, see 141
(1) Set of injection lines
(2) Right rail (3) Set of injection lines
(4) Left rail
Technical data
High-pressure lines (initial use) ................................................................................... Initial torque 10 Nm
High-pressure lines (initial use) ....................................................................................Final tightening 60°
High-pressure lines (re-use) ........................................................................................ Initial torque 10 Nm
High-pressure lines (re-use) .........................................................................................Final tightening 30°
Rail pressure sensor............................................. M18x1.5 ............................................................80 Nm
AE6 3st edition 107