Mahindra Maxximo Mini Van Vx 2012, Руководство по диагностике

Страница: 73 / 274

Diagnostic Manual MAN-00183
MAXXIMO
MINIVAN
VX June 2012
/
Rev
1
The reproduction, translation, transmission, in part of or whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution.
© 2012 Mahindra &
Mahindra Ltd.
73
Step 1
Go to Step 5
Does continuity
exist?
YES
Go to Step 4
Go to Step 3
Is voltage 4.7 to
5.25V?
NO
 Ignition OFF
 Rail pressure sensor connector
DISCONNECTED
 ECU connector CONNECTED
 Check the continuity between
pin 3 and pin 1 of the rail
pressure sensor connector
Step 2
YES
NO
 Clear the error codes and
verify
 Turn ignition OFF
 Rail pressure sensor
connector
DISCONNECTED
 ECU connector
CONNECTED
 Turn ignition ON
 Measure the voltage
between pin 3 of the rail
pressure sensor connector
and battery negative
 Connect the smart tester
 Turn the ignition ON
 Initialise the diagnostic tool

Record the error codes and clear
 Turn ignition OFF
 Turn ignition ON
 Verify if P0192 or P0193 is
present?
Is P0192 or P0193
is present?
YES NO