Diagnostic Manual MAN-00183
MAXXIMO
MINIVAN
VX June 2012
/
Rev
1
The reproduction, translation, transmission, in part of
or
whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution.
© 2012 Mahindra &
Mahindra Ltd.
69
NORMAL OPERATION
The ECU supplies a reference voltage to the rail pressure sensor. The rail pressure sensor output voltage varies with
variation in rail pressure.
DTC Detecting Condition
Probable Causes
The rail pressure sensor output voltage is less than 0.5V
The rail pressure sensor output voltage is more than 5.25V
Harness or Connectors
Failed rail pressure sensor
LAMP STATUS
Check engine lamp ON
FAULT REACTION
Engine low idle RPM set at 1200.
The accelerator pedal will respond but the maximum RPM is set as 2000 with fuel quantity limitations
CIRCUIT
Содержание Maxximo Mini Van Vx 2012
Страница 274: ......