MAHA SA 2 Euro, Руководство по эксплуатации и техническому обслуживанию

Страница: 122 / 134

Appendix Eurosystem / Profi-LON
D1 E101BA1-GB09 6.3
6.1 System Variables
No. Description Default Unit Comments
51
Speedometer tester: 1st target speed
This variable sets down the first target speed which the
test vehicle's speedometer should approach.
30
km/h
52
Speedometer tester: 2nd target speed
This variable sets down the second target speed which
the test vehicle's speedometer should approach.
60
km/h
53
Speedometer tester: 3rd target speed
This variable sets down the third target speed which the
test vehicle's speedometer should approach.
90
km/h
54
Speedometer tester: 4th target speed
This variable sets down the fourth target speed which
the test vehicle's speedometer should approach.
120
km/h
55 Speedometer tester: 5th target speed
This variable sets down the fifth target speed which the
test vehicle's speedometer should approach. 150 km/h
56 Speedometer tester: 6th target speed
This variable sets down the sixth target speed which the
test vehicle's speedometer should approach. 180 km/h
57 Speedometer tester: 7th target speed
This variable sets down the seventh target speed which
the test vehicle's speedometer should approach. 210 km/h
58 Speedometer tester: 8th target speed
This variable sets down the eighth target speed which
the test vehicle's speedometer should approach. 220 km/h
59 Speedometer tester: 9th target speed
This variable sets down the ninth target speed which the
test vehicle's speedometer should approach. 230 km/h
60 Speedometer tester: 10th target speed
This variable sets down the tenth target speed which the
test vehicle's speedometer should approach. 240 km/h
61 Speedometer tester: max. display
180 km/h
62
Speedometer tester: Speed window
A range within the speed must lie is set dowm in this
variable so that the test value is automatically filed.
5
km/h
63 Speedometer tester: Time window
The time set down in this variable has influence on the
automatic storing of the test values. Only when the
speed is in the speed window, as set down in variable
62, during the time set down here will the test value be
automatically stored. 30 1/10 s
64 not used -- --
65 LPS-File read-in possible
Only if LPS_IN directory is available
Active only after renewed program start 0 0 = inactive
1 = active
66 Task switching Windows/Eurosystem possible
(Taskswitching)!
Active only after renewed program start! 2 1 = inactive
2 = active
67
Spain / Ireland Mode
0
0 = inactive
1 = active
68 License no. always with capital letters 1 0 = inactive
1 = active
69
Norway –Mode
0
0 = inactive
1 = active