Eurosystem / Profi-LON
PC Program Operation
4.62
D1 E101BA1-GB09
4.8.3
SA2D Measurement Mode
When clicking the menu point „SA2D Measurement Mode“ select between automatic start up or
only weighing.
1 Use <7> Test Procedure in the main menu.
The screen to the right appears.
2 Select the box <F7> to activate the
weighing mode.
The shock absorber tester determines only
the axle weight, the test stand motors are
deactivated.
4.8.4
4-Wheel Drive Mode - ASR/ASD Check
The brake tester can optionally be equipped with a 4-wheel drive mode for testing the brakes of
vehicles with “rigid“ or “Visco-“ 4-wheel drive control. ASR (anti-slip regulation) and ASD
(automatic locking differential) checks are also possible.
Please note that a pedal force meter and a remote control “Tele-BPS“ are required for a
4-wheel drive test.
The installation of the 4-wheel drive mode in the PC program is to be done by a MAHA service
technician via the setting menu.
1 The main menu screen is then expanded to
include an additional display and box
labelled “F9 4-wheel drive“.
2 Use <F9> to switch between the various
modes or to switch off the 4-wheel drive
mode.
In addition the desired mode must be set
using the 4-wheel drive switch.
The various modes are shown as follows:
for ASR / ASD - test
for “rigid“ 4-wheel drive regulation
for Visco 4 wheel drive regulation
for switched-off mode
Содержание SA 2 Euro
