PC Program Operation
Eurosystem / Profi-LON
D1 E101BA1-GB09
4.71
7 If the <F7> AU-Data key is now used, only
data sets out of the database appear for
the manufacturer and year of construction
which has been entered.
This makes it easier to find the vehicle with
the proper motor type.
8 Go to the desired vehicle with the cursor
keys and load the AU-Data with <F4>.
9 The customer mask will appear again in
which the selected vehicle has been
imported.
The data from the AU-Database are faded onto the screen for comparison purposes during the
4 gas test.
The vehicle selection can also be done when the Multex-Software is running. See the Multex
operating manual for the proper procedure.
4.8.7.4
Redisplay of the Measurements
The redisplay of the measurements is already described in detail in paragraph
4.4 Redisplay of
Measurements
. It is recommended that this paragraph be read through again.
1 Activate the <A> with the 4 gas tester
symbol on the redisplay selection screen
2 Eurosystem starts the Multex software as
with a measurement and after a few
seconds the redisplay screen appears
which is very similar to the Multex
measurement screen.
3 Here the measurement values can be
viewed and printed out as oftenas needed.
4 Exit the Multex-redisplay with <F6> and
confirm the inquiry which followed with
<F6>.
5 It is also possible to print measurement
values from the selection screen to the
right. Use the box with the printer symbol or
the <F12> key.
Содержание SA 2 Euro
