PC Program Operation
Eurosystem / Profi-LON
D1 E101BA1-GB09
4.7
4.2.2 Side-Slip
Test
1 Drive with front axle over the test plates of
the side-slip tester (speed 2.5…7.5 km/h).
)
Side-slip tester active
The screen opposite appears and shows
the front axle measured side-slip deviation.
2 If the measurement values are within the
range of tolerance, i.e if the side-slip is OK
the values will be shown in green,
otherwise in red.
The measurement of the rear side-slip takes
place when the rear axle of the vehicle
passes over the side-slip plates.
The rear axle test is analogous to the front
axle test.
)
Side-slip tester active
The screen now includes the values of the
rear axle measurement.
The measurement value in the example is
outside the tolerance range, i.e. the side-slip is
not OK and the value is shown in red.
Note that the first measurement value filed in the temporary storage is always the side-slip of
the front axle. (second measurement value is the rear axle) This order cannot be changed.!
Intervention in the automatic test procedure is not possible for this measurement. If the test
is directly repeated the measurement values in the temporary storage are overwritten.
The measurement values can be stored and reviewed at a later point. For an exact description
read section
”Review of Measurement“ and “Storage of Measurements”.
Содержание SA 2 Euro
