MAHA SA 2 Euro, Руководство по эксплуатации и техническому обслуживанию

Страница: 107 / 134

Eurosystem / Profi-LON PC Program Operation
4.68 D1 E101BA1-GB09
4.8.7 4 Gas Test with Eurogas-Module
The 4 gas test with the Eurogas-Module is described separately in this section because Multex
developed its own software for the operation of the Eurogas-Module to which Eurosystem can
create a link.
The Multex Eurogas module is connected to the computer via a serial interface and the Multex
Software is installed by MAHA-Service technicians. All other settings are also done by a skilled
technician.
4.8.7.1 Switching on the System
Eurosystem loads in the usual manner when switching on the system. During the Eurosystem
start sequence a self-test of the Eurogas module will also be done.
For this reason, attention should be paid that when the system is switched on the Eurogas
module must be switched on at the same time.
Wait for the entire start sequence to be run through and pay attention to the messages on the
screen. Continue as always.
1 After switch on, booting and initialization
follows exaclty as described in paragraph
4.1.1 Start Eurosystem .
2 As soon as the screen „Connected devices“
has been confirmed with <RETURN> the
message to the right appears
3 Then a light blue bar labeled „self-test
running“ fades in.
4 Wait for the self-test to run through. After
successfully completed test run the
Eurosystem main menu appears.
5 The main menu which appears has been
expanded with a box titled „F11“ and with
the symbol of the 4 gas tester.
6 A window will appear on top of the main
men if the Eurogas module presents an
error message.
In this case, please check the power supply
and the wiring of the interface of the
Eurogas-Module.
After the error has been corrected the
Eurosystem must be started anew. (per
Warm start or main switch)