PC Program Operation
Eurosystem / Profi-LON
D1 E101BA1-GB09
4.9
4.2.4 Brake
Test
Please pay attention to the preset order in which the brake test is done:
Ovality test of the front axle
Brake force test of the front axle
Brake force test of the parking brake
Ovality test of the rear axle
Brake force test of the rear axle
The measurement values are filed in the above order in the temporary storage. The test stand
cannot recognize which brake is being tested!
Example: You have conducted the brake test for the parking brake. The display jumps to the
next brake test, i.e. for the rear axle. Even if you repeat the parking brake test, the
measurement values will be stored as rear axle values.
Always pay attention to the box “Testing“ in the upper right-hand corner of the screen. It shows
which brake is to be tested. (Or switch with <F2> or <F3> to the proper axle).
Intervention in the automatic testing procedure and proper storage is described after
completion of the ovality test and the brake force test.
Drive slowly and straight onto the brake tester. Both sensor rollers must be pushed down.
Release brake and place gear shift to neutral.
The screen below appears. Instruction line:
)
Please wait
and then
)
Please brake
4.2.4.1 Ovalitätsprüfung
1 In
box
“Testing“ in the upper right-hand
corner “FA“ will appear for front axle.
Simultaneously the axle of the vehicle
outline below will be highlighted red.
2 A yellow range for the ovality measurement
is indicated on the lower left column scale.
3 Brake slowly until the brake force is in the
yellow range and keep it constant.
)
Ovality test, hold brake force
4 Wait until the timer has run out.
The ovality values are shown in the display
over the timer and filed in the temporary
storage.
The settings for the braking range of the ovality test and the timer are preset. The timer is set for
the time which corresponds with one wheel revolution.
Changes to these settings may only be done by MAHA service technicians.
The brake force test follows directly after the ovality test.
Содержание SA 2 Euro
