MAHA SA 2 Euro, Руководство по эксплуатации и техническому обслуживанию

Страница: 105 / 134

Eurosystem / Profi-LON PC Program Operation
4.66 D1 E101BA1-GB09
4.8.4.2 Checking ASR / ASD
A check of the ASR or ASD simulates the situation of a „gripping“ tire and a slipping tire. For
example, one tire of the vehicle is on a dry surface and the other tire is on an ice plate.
During the check, one roller set is blocked (dry surface), and the other runs freely (ice plate). If
the ASR (or ASD) is functioning during the check, it is possible to drive the vehicle out of the
test stand.
Test Procedure
1 Activate ASR/ASD Mode
Select desired 4 wheel drive mode with
<F9>.
2 Prepare function test
a. Drive onto the brake tester with the driven axle.
Both sensor roller of the roller set must be pressed.
b. Press the clutch or place the gear in idle.
Place automatic gear to the neutral position (N) .
3 Left-hand function test
a. Select the left-hand roller set via the
motor ON key of the remote control.
⇒
The selected (left) roller set is blocked.
b. Place in gear and slowly drive off the
roller
set.
⇒
If the ASR (or ASD) is functioning
properly, it is possible to drive off the
roller set.
⇒
The blocking is released when the
sensor roller is no longer pressed.
With a defective ASR (or ASD) the freely running roller set is accelerated!
⇒
Do not accelerate beyond 11 km/h, otherwise the roller drive may be damaged.