MAHA SA 2 Euro, Руководство по эксплуатации и техническому обслуживанию

Страница: 31 / 134

Eurosystem / Profi-LON Profi-LON Operation
3.12 D1 E101BA1-GB09
3.5 Single Wheel Test (Optional)
3.5.1 Brake Test – Single Wheel, without Remote Control
The single wheel measurement is used for testing the brake effectiveness of only one side. Use
single wheel selector switch to turn on roller drive of one vehicle side only. Selection is possible
before or after driving vehicle on to the roller set.
DO NOT leave vehicle during test. A second person is required to turn on selector switch
if vehicle is already on roller set..
Once the test lane has been properly switched on (paragraph 3.2.1) and ready for testing, the
test procedure can proceed.
1 Select single wheel test
Select desired vehicle side.
This setting can be done either before or after driving onto the
brake tester.
2 Do brake test
As described in paragraph „Test procedure without remote
control“.
left right
3 Change to other vehicle side
If the other vehicle side is also to be tested first turn single wheel switch to position 0.
→
Roller drive switches off.
Select other vehicle side.
→
Roller drive of other side switches on.
4 Complete single wheel test
Turn single wheel switch to position 0.
→
Both roller drives are running.
Exit assistance device does not work during single wheel test. At test completion turn
selector switch to position 0.