madur electronics maMoS 100, Руководство пользователя, Страница: 88 / 96

www.madur.com Manual maMoS 100/200/300/400
Picture 99. The graph showing the signal level on analogue output during successive stages of
measuring cycle for different options.
−
"Set the electrical minimum" - the minimum signal level is set on the outputs
(0 V, 0 mA or 4 mA).
−
"Set the electrical maximum" - the maximum signal level is set on the outputs
(5 V, 10 V or 20 mA).
If an error has occurred only the "Set the electrical minimum" or "Set the electrical
minimum" options can be set .
7.3.10. Relays
The function enables the user to set the parameters of the relay outputs and
the PWM (PV3) digital output. The function can be reached by pressing the quick access
button and via the menu bar with the help of the "Relays" button. After the function has
been opened the window shown in Picture 100. appears. The window consists of three
tabs – each assigned to a separate output. Changes to the settings are signalised in red.
The changes made in the window will not effect the monitor's settings until the "Save set-
tings in the analyser" button has been pressed. If the changed settings are not sent to the
monitor and the user makes an attempt to close the window a confirmation message will
appear. The current settings of all the outputs can be seen below the tabs no matter which
tab is currently open.
88