madur electronics maMoS 100, Руководство пользователя, Страница: 89 / 96

www.madur.com Manual maMoS 100/200/300/400
Picture 100. The "Relay settings" window.
Attention!
The relays and the accompanying connector are optional equipment and
are not provided with every monitor.
7.3.10.1. Outputs' settings.
Both relay outputs and the PWM output are configured in the same way. To set
their parameters the appropriate tab has to be chosen. The "Relay #1"
and "Relay #2" tabs are assigned to the outputs of the two relays whilst the "PV3" tab
refers to the PWM output. After the tab referring to the output which is to be configured has
been chosen, a picture showing the location of the chosen output on the connectors of the
monitor's main board will appear on the right side of the screen (Picture 100.). The draw-
ing symbolically shows which contacts refer to which signals of selected output. Using the
"Test (toggle) relay” button (placed below the picture) the working of the particular output
89