madur electronics maMoS 100, Руководство пользователя, Страница: 54 / 96

www.madur.com Manual maMoS 100/200/300/400
5.8. Replacing the head of the peristaltic pump
As the mechanism of the peristaltic pump and its hose wear out with time there is
a possibility of replacing the whole head of the peristaltic pump.
To replace the head of the peristaltic pump it is necessary to:
1. Switch the monitor off.
2. Slip the pump tubing from the metal tubes
3. Remove the head – by squeezing the head latches gently with fingers (Pic-
ture 56.) and slip the head off the axis.
4. Install the new head in the reverse order.
Picture 56. The peristaltic pump of the maMoS monitor (the arrows indicate the direction of re-
leasing the latches).
6. PRESENTING THE RESULTS
The values of all the results measured and calculated by the monitor can be
presented on the built-in displays and/or on analogue outputs. The device has eight ana-
logue outputs: four voltage (potential) and four current and up to four LCD displays (4.5 di-
git). What is more the monitor is equipped with a digital output ( PWM ) and can be option-
ally equipped with two relay outputs which can be assigned to any of the measured values.
Configuring the displays, the analogue outputs and the relays can be performed
with the help of the MaMoSII.exe program.
The way the results are presented depends on the currently performed stage of
the cycle. During the " MEASUREMENTS" stage the results displayed and shown on the
analogue outputs are the actually measured values. During the " VENTILATION" and
"STAND-BY" stages the results are presented in a way defined in the MaMoSII.exe pro-
gram (see chapter 7.3.3.5. ).
54