madur electronics maMoS 100 Скачать руководство пользователя страница 4

Страница: 4 / 96

www.madur.com

Manual

maMoS

100/200/300/400

1. INTRODUCTION

maMoS

is a high quality gas monitor. The device is produced using the latest

technology. Due to the modular design of

maMoS

it is possible to meet the individual cli-

ent's expectations by adjusting it to performing particular measurements, such as concen-

tration of various gases, pressure, temperature and a number of boiler parameter meas-

urements.

The monitor is in particular designed for flue (boiler) gas analysis, but it can be

used for different purposes (such as producing biogas from garbage and animal excre-

ments) as well.

Each

maMoS

monitor, according to its configuration, enables the user to measure

concentrations of one or more gases. Additionally the device can present the measure-

ment results on the liquid crystal displays and up to eight analogue outputs. Independently

of the built-in measurement equipment there is also the possibility of reading the measure-

ment results and changing the settings with the help of the computer program provided.

It is worthwhile devoting some time to reading this manual. This will help the users

familiarise themselves with the device and its operation. Proper operation will assure the

failure-free working of the device.

Содержание maMoS 100

































































































Результаты поиска

Содержание maMoS 100

Отзывы:

madur electronics maMoS 100, Руководство пользователя, Страница: 4 / 96

Результаты поиска

Содержание maMoS 100

Отзывы: