madur electronics maMoS 100, Руководство пользователя, Страница: 63 / 96

www.madur.com Manual maMoS 100/200/300/400
After the necessary changes to the settings are made, confirm them by pressing
the " Save settings in the analyser" button. If the user makes an attempt to close the win-
dow before the changed settings are sent to the monitor the confirmation note will appear
(Picture 70.).
Picture 70. Confirming the changes of the settings.
7.3.3.1. Calculations of the results
7.3.3.1.1. Calculations of CO2
In the " Calculate CO2" section (Picture 69.) the user can choose from two options
which influence the monitor's function unless the CO
2
sensor has been installed.
If the first option: " Always calculate CO2 based on O2..." is chosen the CO
2
concentration
value is calculated by the monitor on the basis of the measured O
2
concentration and the
CO2max fuel parameter. If the user chooses the second option: " Never calculate CO2..."
the presented CO
2
concentration value will be the result of the measurement performed by
the CO
2
sensor. If the monitor is not equipped with such a sensor and this option is chosen
a message about an error will appear on the display (see the brochure " Calculation of
results in the madur gas monitors " which can be downloaded from the website:
www.madur.com ).
7.3.3.1.2. Calculations of NOX
The " NO in NO
X
" section enables the user to define the percentage of the nitrogen
monoxide (NO) content in the total nitrogen oxides NO
X
content of the examined gas. The
parameter is used for assessing the nitrogen oxides NO
X
concentrations based on the
measured NO concentration value (see the brochure " Calculation of results in the
madur gas monitors " which can be downloaded from the website: www.madur.com ).
63