madur electronics maMoS 100, Руководство пользователя, Страница: 51 / 96

www.madur.com Manual maMoS 100/200/300/400
The result can be viewed on one of the displays and on an analogue output. Ne-
cessary configurations must be done from the MaMoSII.exe program.
5.7. Replacing the dryer filter
During the ordinary working of the monitor the filter inside the gas dryer wears out.
The condition of the filter should be checked regularly. It is advisable to check the filter at
least once a week. If the device is used intensely or the measurement gas is polluted the
filter should be checked more often. If the filter is very dirty it should be replaced with a
new one.
5.7.1. Replacing the filter in MD2 dryer
To replace the filter properly the user should:
1. Switch the monitor off.
2. Disconnect the electric wire connecting the dryer to the monitor and discon-
nect all the hoses from the dryer.
3. Unhook the dryer – to do so the user should raise the dryer holding the radi-
ator and slip it from the hooks and clips as shown in the pictures below.
Turn off the analyser. Disconnect the electric cable between the analyser and the gas dryer.
Disconnect the tubing that feeds the gas to the dryer.
51