madur electronics maMoS 100, Руководство пользователя, Страница: 27 / 96

www.madur.com Manual maMoS 100/200/300/400
4.2. First start-up
After the monitor has been mounted and all the necessary electric and gas lines
have been connected the device can be started up. The monitor starts-up when connected
to the power source which is signalised by the red indicator lamp on the device's front
panel. After the testing and initial stages (the warming-up stage) the monitor proceeds to
work in a cyclic mode according to factory settings.
The next thing to do is to set the monitor's settings to the user's need. Changes to
the monitor settings can be done with the use of the MaMoSII.exe software. Chapter 7.
contains a description of the program's functions.
Attention!
As the maMoS analysers are compensated thermally the proper
measurement results are possible only if the analyser works in
the upright position with the casing closed. Otherwise the
proper temperature distribution in the device cannot be as-
sured.
5. OPERATION
To simplify the operation of the monitor the basic operational rules and service
activities have been described below.
5.1. Basic operation
To assure proper, failure-free working of the device the rules below should be fol-
lowed:
1. The condition of the filter of the external dryer should be checked regularly,
dirty filters should be replaced with new ones.
2. The condition of the hose of the peristaltic pump should be checked regu-
larly, the hose or even the whole head of the pump should be replaced when
damaged.
3. The device works properly only when mounted upright on the wall. This posi-
tion assures the appropriate outlet of the condensate from the dryer. If the
condensate is not allowed to exit correctly, the monitor might suck the con-
densate in and be damaged.
27