65
FAQ
Q: What is the meaning of the Ethernet port LED color in the back panel of the NAS enclosure?
A: Green light means a successful 100Mb/s fast Ethernet connection to the network, red light indicates
a successful Gigabit Ethernet connection. Flashing orange light is the network data activity.
Q: How long does the NAS take to boot up and get ready for use?
A: It usually takes around 3 minutes to boot up and connect to the network. After powering up or reboot
the NAS, please allow enough time before trying to access it, refresh the connection or the
Administrator page in necessary.
Q: What should I do when Ethernet port LEDs on the NAS do not light up?
A: Power off then power on the NAS if both LEDs do not light up simultaneously after a long period of
time. Allow 3 minutes at least for the NAS to fully start up. During the start up process, it is normal for
the LEDs to go off and on.
Q: I can’t I power on, restart or shutdown the NAS. What can I do to fix the problems?
A: When the NAS is powered off, please press the front power button for 2 seconds to turn it on, the
front LED will turn on to blue. If you can’t restart or shut down the NAS, please verify that there are no
background operations running such as a file download, disk formatting, etc… Stop the ongoing
operation then try restarting or shut down.
Q: Why does the Mac computer ask me to format my NAS drive using USB connection after I’ve
formatted the disk through NAS Administrator? Why doesn’t my NAS drive mount in the Windows
system under USB connection?
A: These problems generally occur at the direct USB connection of the NAS enclosure to a computer.
The reason is the NAS was formatted by the Disk Utility in NAS Administrator using a format such as
NTFS, Ext2 or Ext3, incompatible to Mac or PC under direct USB connection. The solution is, first to
back up existing data from the NAS through network connection, then to use Disk Utility to reformat the
NAS drive into FAT32 system and restore the data back to the NAS drive. This way you won’t have
trouble switching the NAS drive between network connection and USB connection.
Q: Why can’t certain settings and function configuration be done or saved?
A: Please verify that the hard disk is installed correctly in the NAS enclosure and the drive is formatted
completely first by the Disk Utility inside NAS Administrator.
Q: What can I do if I forget my password?
A: While the NAS is on, press the “Reset” button in the back of the NAS for 5 seconds, then power off
and power on the NAS, the process will restore the NAS to factory default setting including password
“admin”.
Note
: Restoring “factory default” will override all prior system setting changed by the user. However,
the previous setting changes saved in the hard drive will be reloaded to the NAS controller board after
the NAS restart.
Q: How come I cannot write file via FTP in MacOS X browser?
Содержание G-S350UN
