Lynx SMART30, Руководство пользователя

Страница: 32 / 48

Liquid Propane Units

Is the cylinder almost empty?
Almost empty cylinders may not have su ffi cient pressure to run
the burners at high heat.

Have the line pressure checked by a quali fi ed technician.

Flow limi ng device.
Improper ligh ng procedure may have ac vated the liquid
propane cylinder’s fl ow control device, reducing heat output.
To reset the fl ow control:

Shut o ff all burner controls and close the liquid propane
cylinder valve.

Open one gas valve to relieve any pressure in the LP
hose, then close the gas valve

Wait 30 seconds and, very slowly, reopen the cylinder
valve.

Wait a few seconds and relight a burner.
Bulk propane cylinder users:
Bulk liquid propane cylinder lines must be properly regulated.
Ensure that you are using a 4/11 appliance regulator supplied
by Lynx and converted to liquid propane gas. Also, ensure that
you do not have more than one regulator in line.
Natural Gas Units:

Supply line
Ensure that the supply line is at least ¾” inside diameter or 1”
outside diameter.

Check Line pressure
Natural gas inlet pressure should be at least 5” W.C. and
manifold pressure not less than 4” W.C. under full load (with all
burners on).

Check burners for blockages.
TROUBLESHOOTING YOUR SMARTGRILL BY LYNX™... con nued
Proper levelling during installa on is cri cal. A grill that is out
of level will cause erra c burner combus on and
ine ffi cient, uneven hea ng. A carpenter’s spirit level should be
used to level the grill both front ‐ to ‐ back and side ‐ to ‐ side.
If the low heat problem persists:

Check the gas supply line sizing requirement

Check the gas supply line for kinks or damage.

Check the thermosta c control for proper opera on.
LOW OR INSUFFICIENT HEAT
LIGHTS WILL NOT LIGHT
For the blue LED lights and white halogen lights:

Check power

Ensure that the grill is connected to a live AC
power source.
SMARTGRILL SELF ‐ DIAGNOSIS
Your SmartGrill by Lynx™ technology includes self ‐
diagnosis of some issues and will let you know either
with an audible statement of the issue, or send you a
text message displayed in your app. "Burner <N>"
indicates the SmartGrill will tell you if it is Burner 1, 2,
3, or the Top Burner (ro sserie). Any me a burner
does not light, the SmartGrill will turn that burner o ff .
Audible : "Burner <N> igniter malfunc oned."
Text : "Igniter failed to start."
Indicates the igniter has a problem. Check to see if
gas is turned on. Wait 5 minutes for the gas to dissi ‐
pate, then try ligh ng it again. Call Lynx at 888 ‐ 289 ‐
5969.
Audible : "Burner <N> igni on malfunc on."
Text : "Burner <N> failed to ignite ."
Indicates the burner is not lit. Check to see if gas is
turned on. Wait 5 minutes for the gas to dissipate,
then try ligh ng it again. If it s ll does not light, call
Lynx at 888 ‐ 289 ‐ 5969.
Audible : "Burner <N> could not stabilize."
Text : "Burner <N> failed to stabilize.
The burner was set a li le too cool. Wait 5 minutes for
the gas to dissipate, then light it again. Leave it on
high for a li le longer to heat up before adjus ng it
down to your target temperature.
Audible : "Burner <N> cannot reach target tempera ‐
ture."
Text : "Burner <N> cannot reach target temperature."
Check to see if gas is turned on. Wait 5 minutes for
the gas to dissipate, then try ligh ng it again. If it s ll
does not light, call Lynx at 888 ‐ 289 ‐ 5969.
Audible : "Burner <N> has no fl ame."
Text: "Burner <N> has no fl ame."