Lynx SMART30, Руководство пользователя

Страница: 19 / 48

DANGER!
To prevent fi re or explosion hazard, DO NOT
smoke or allow any poten al source of igni on
(sparks, electrical arcing, etc) in the area while
performing a leak test. Leak tests should be
conducted outdoors only. Never conduct a leak
test using fi re or fl ame.
FINAL CHECKS
LEAK TESTING FINAL CHECK
Leak Test Procedure:

Create a soapy solu on of 1 part soap and 3 parts
water.

Con fi rm that all control dials are in the o ff posi on.

Turn on the fuel supply. For natural gas, turn the
valve handle 1/4 turn to align with the gas fl ow.

For L.P., turn the cylinder valve dial counter clockwise
one full rota on.

Apply the soap solu on generously by paint brush
or squirt bo le on all connec ons and fi ngs.

If bubbles appear to “grow” on any of the connec ‐
ons, you have a gas leak. IMMEDIATELY turn o ff the
gas supply.
Fixing a Gas Leak:

Shut o ff the gas supply

Turn all grill controls to the “ON” posi on to purge
the grill of any gas build ‐ up, then turn the controls
back “OFF”.

Wash o ff the soapy solu on with cold water and dry.

Tighten the loose joint, or replace the faulty part
with manufacturer ‐ recommended replacement
parts.

DO NOT a empt to repair the L.P. cylinder valve if it
is damaged. The only way to safely resolve a dam ‐
aged cylinder is to REPLACE IT.

Repeat the leak test to ensure that no leaks are present.
Finally, check all the burners for proper opera on. Make
sure the control knobs turn freely and completely through
their full range.
IMPORTANT:
Make sure you know where the main gas supply shut-off
valve is located.
Finally, for safety and for proper use and care, you must
have this manual. Please keep it somewhere safe for
future reference.
For technical support and customer service, call:
Lynx Customer Care Department
62201 Hwy 82 West
Greenwood, MS 38930
Toll Free: 888 ‐ 289 ‐ 5969