®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 35
Daylight Sensor Setup (continued)
Labeling a Daylight Sensor (optional)
1. Enter programming mode.
2. Use the Master buttons to highlight “Sensor Setup” and press
the “OK” button to accept.
3. Use the Master buttons to highlight “Daylight” and press the
“OK” button to accept.
4. Use the Master buttons to highlight “Labels” and press the
“OK” button to accept.
5. Use the Master buttons to display a daylight sensor to label
and press OK to select.
6. Use the Master buttons to scroll through the characters
(lowercase and uppercase letters, plus numbers 0 through 9).
The character you are currently changing will be underlined
on the screen. Press OK to select the character you want,
then repeat for all available characters. Choose a space (no
character) and press OK for any remaining characters. The
info screen will confirm that your name has been saved.
Repeat for all desired sensors.
7. Exit programming mode.
Saved
Saved
Main menu
Zone Setup
Sensor Setup
Daylight Sensor
Diagnostics
Labels
Sensor x/y
xxxx-xxxx
RF
OK
Master
buttons
“OK”
button
Timeclock
(back) button
Label sensor x/y
1: A
A
1 / 11
Sensor Setup
Occupancy
Daylight
