Lupus Electronics LUPUSEC-XT2, Руководство пользователя

Страница: 45 / 148

45
ENGLISH
IP address: test.lupus-ddns.de
Port: 10030
Stream 2: ?CH=2
In the example, the link needs to look as follows:
http://admin:admin@test.lupus-ddns.de:10030/GetData.cgi?CH=2
The command “/GetData.cgi” shows the camera’s JPEG stream, which transmits at
up to 25 frames/second. If the data volume is too big for your local network, you can
downsize the stream to a refreshment rate of one picture every three seconds. For
this purpose, use the following extension: “/GetImage.cgi?Size=640x480”
In our example, the link would look as follows:
http://admin:admin@test.lupus-ddns.de:10030/GetImage.cgi?Size=640x480
To add the image of a
LUPUSTEC recorder (LE800 Plus or D1 series), use the
following syntax:
http://Username:Password@DVR-ADDRESS:PORT/cgi-
bin/net_jpeg.cgi?ch=Videochannelno.
Example of a video recorder:
User name: test
Password: test
DVR address: test.lupus-ddns.de
Port: 10001
Camera image/channel 1: /cgi-bin/net_jpeg.cgi?ch=0
Note:
To integrate an anlog DVR, always subtract 1 from the required. Channel 4
corresponds to ch=3, channel 1 ch=0.
In our example, the link then looks as follows:
http://test:test@test.lupus-ddns.de:10001/cgi-bin/net_jpeg.cgi?ch=0
Caution:

Do not use Microsoft Internet Explorer, because it causes problems with the
camera image display.

If you have any difficulties to implement your cameras, please do not hesitate to
contact our support hotline by calling 0049-6341-93 55 30!

The PIR network camera is not integrated via the Cameras menu, but as a sensor.