Lupus Electronics LUPUSEC-XT2, Руководство пользователя

Страница: 21 / 148

21
ENGLISH
Automation
In the Automation menu, you can automatically arm or disarm the control unit among
other things at certain times and conditions, control any consumer (device) via
wireless sockets and in-wall relays (
zones ) depending on temperature and sensor
action, activate or deactivate entire (wireless switch) groups and more. You can
establish up to 40 automation rules.
Note:
After having established or changed an automation rule, save this setting by pressing
DONE next to the automation rule and then OK on the bottom. If you do not want to
save the setting, press RESET or leave the menu item.
Example 1:
Purpose:
A wireless socket or in-wall relay is to turn off electricity consumers, e.g. TV set, in
order to avoid unnecessary standby power consumption, when nobody is at home.
Settings:

Connect a (PSS) wireless socket (see instructions for sensors) to the control unit
(in our example, this is area 1 / zone 1).

Go to menu “Control unit”

“Automation”

Click on EDIT in line 1

Select the area (in this example 1), to which the CONDITION applies

Select CONDITION  CHANGE MODE  ARM

Go to SCHEDULE and select ALWAYS