Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 99 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 99 Jump to Web Interface
Send Email sends an alert if your email protocol has been
configured. See ““Email” on page 115.
Trigger Alarm Output
This column has your recorder
and/or cameras activate
external alarms. The A alarms
are activated by your recorder.
The arrows point to which
connection you wish to
activate (e.g.,
A->2 means your
recorder triggers alarm #2).
Camera alarms are numbered by the camera channel, with a prefix
that is set by the camera manufacturer (Luma cameras use D as
a prefix). Most cameras can only trigger one alarm, but some can
trigger either or both of two (e.g., D4->2 means the camera on
channel 4 triggers its second alarm circuit).
Note that camera alarms are only available on IP cameras (and thus
not available on DVRs).
Trigger Channel
When an alarm is triggered,
this determines which
cameras get activated to an
event state (and therefore,
presumably, recording actively
and at a higher frame rate).
The cameras are numbered
by channel. By default, the
selected camera activates and
the others do not.