Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 172 / 217

Luma Recorders
|
Local Interface
Jump to Main TOC 172 Jump to Local Interface
Below the settings starburst, Sensitivity determines how picky
your camera is with regards to motion detection. If you are getting
false positives, it may be that your camera’s sensitivity is too high
(for example, it’s detecting a curtain moving in the breeze of the
air conditioner). Moving the slider to the right makes your camera
more sensitive to motion; moving the slider to the left makes it less
sensitive. You can click the up and down arrows to move the settings
by one, click and hold the arrows to scroll the values, or drag the
slider to set the value.
At the bottom, click Copy to duplicate the current camera’s motion
settings to other cameras.
Click Apply to save the changes you have made.
Click Back to return to the settings menu, or Live View to return to
the live page.
Choosing an Area (NVR models)
To the left, the camera view shows the area being used for motion
detection. By default, this is the entire screen. If you want to use
only a portion, click
Clear to remove the defined motion detection
zone.
Click and drag on the screen to create a new area for motion
detection.
Click on the Settings starburst icon to set up a trigger, schedule, and
alert linkage method.
Below the settings starburst, Sensitivity determines how picky
your camera is with regards to motion detection. If you are getting
false positives, it may be that your camera’s sensitivity is too high
(for example, it’s detecting a curtain moving in the breeze of the
air conditioner). Moving the slider to the right makes your camera
more sensitive to motion; moving the slider to the left makes it less
sensitive. Drag the slider to set the value.
Click Apply to save the changes you have made.
Click Back to return to the settings menu, or Live View to return to
the live page.
Motion Detection Settings Window
The trigger channel tab allows you to define which cameras start
recording when motion is detected. This defaults to the selected