Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 22 / 217

Luma Recorders
|
Additional Installation
Jump to Main TOC 22 Jump to Additional Installation
Go to the live view for the encoder’s channel. You should see a blue
screen; this shows that the encoder is properly connected.
Connect the BNC cable from the PTZ camera to the encoder.
Connect the RS-485 cable from the PTZ camera to the RS-485
connection on the encoder (
not the NVR).
Power on the PTZ camera. You should see video in channel assigned
to the encoder.
Go to Configure This Recorder > Camera Settings > PTZ Settings
and set parameters accordingly.
To use the PTZ controls, select the NVR channel that the PTZ
camera is on and click on the PTZ icon above the timeline bar. If
everything has been set up correctly, you will have control over the
PTZ camera.
Multiple Cameras on a 4-Channel Encoder
If you want to attach several cameras through a 4-channel encoder,
ensure that you populate the encoder’s IP address to each NVR
channel, and in the modify options, select each camera number to
match the encoder’s camera output number.
Example:
Encoder camera 1 = camera 1 in the IP camera device list
Encoder camera 2 = camera 2 in the IP camera device list
Encoder camera 3 = camera 3 in the IP camera device list
Encoder camera 4 = camera 4 in the IP camera device list