Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 97 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 97 Jump to Web Interface
The days of the week are shown as tabs across the top. There is also
a tab labeled Holiday if one or more holidays have been enabled
(see “Holiday Settings” on page 118). Select the tab for the day you
want to edit.
You can click All Day to have one activity applied to the entire
24-hour period of that day, or you can click Customize to define
behavior by time brackets over the course of the day.
When customizing, you can schedule up to eight different segments
of time, and define the activity for each segment. By default, the first
segment runs from 00:00 to 24:00, making the device use the activity
all day. To edit a time segment, click on the clock button at the
right of the box and enter the new time. Click on the clock again to
accept the edit. Once you’ve set your desired start and stop time,
select the activity from the list to the right.
Be sure to fill the entire 24-hour period so that there are no lapses;
schedules are inactive unless assigned. Schedule gaps smaller than
ten minutes may be hard to see, especially if they occur at the top of
the hour.
You can copy the schedule that you have defined for that device
(only) to other days. At the bottom of the window, use the
checkboxes select the weekdays to which you want the schedule to
apply. You may select days individually, or click
Select All to have