Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 81 / 217

Luma Recorders
|
Remote Control
Jump to Main TOC 81 Jump to Remote Control
While in PTZ Control Mode
If the PTZ control panel is open, you can use the following controls:
1) Power
When pressed, this exits PTZ mode, then
reboots your recorder. Use the arrow keys
and the Enter key to confirm your choice.
It will not cut power to the device; you’ll
have to flip the power switch. This also
does not power your recorder up.
2) Dev
This enables or disables the remote control.
See “Troubleshooting” on page 87.
3) Keypad Group
Pressing a key causes the PTZ control
dialog to switch to that channel. If you are
switching to a multi-digit channel, don’t be
too slow entering the number.
6) Rec
In PTZ control settings, press the button and then you can call a
PTZ preset by pressing a numeric button. If you are switching to a
multi-digit preset, don’t be too slow entering the number.
9) VOIP/Mon
This sets the zoom level to the “home” setting (typically the widest).
10) Menu
This starts the camera’s wiper, if the camera is so equipped.
12) Direction/Enter Group
These control the PTZ camera’s movement. The Enter key activates
whichever button is currently highlighted in the PTZ control panel.